Zilog ZUSBOPTS Bedienungsanleitung PDF herunterladen (Seite 39)

UM025603-0814 Establish A Wireless Connection

Zilog Educational Shields

User Manual

11. Observe the Console 1 prompt change to <REMOTE>>, as shown in Figure 30.

12. The wireless link is now established, and the commands issued on Console 1 at the

<REMOTE>> prompt will remotely control Console 2. To verify that this link is operat-

ing correctly, the output status LED on the Z-PAN Shield will now be illuminated in a

solid green color, and should not be blinking.

13. Demonstrate the control of Console 2 by entering the following command on Console

Setpins pa 07 on

The PA0, PA1 and PA2 LEDs on the Test Shield connected to Console 2 should now

be illuminated.

14. To turn off Port A bits 0, 1, and 2, enter the following command:

Setpins pa 07 off

15. To close the communication link, enter the Ctrl-D command on both consoles, or

press the reset button on the Platform. To gain remote control of the opposite shield,

simple reverse this procedure.

Figure 30. Module 1 Prompt After wremotehost Command

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 58 59

Keine Kommentare

Zilog ZUSBOPTS Bedienungsanleitung Seite 39