Zilog ZUSBOPTS Bedienungsanleitung PDF herunterladen (Seite 37)

UM025603-0814 Establish A Wireless Connection

Zilog Educational Shields

User Manual

4. At the blinking square prompt in each console screen, and with Figures 26 and 27 as

your guide, enter the BTA number generated in your shield’s remote address settings.

In the remaining steps for this procedure, this BTA number will be referred to as BTAnum.

5. On one console, enter the

sr,BTAnum command, then press the Enter key twice.

6. Enter the

d command, and verify that the value of Rem has now changed to the other

shield’s address, as shown in Figures 26 and 27.

7. Enter the

c command on the same console to establish a wireless connection.

8. Enter the

Ctrl-D command on both terminals to return to the ZEdulab> prompt in

the root shell.

9. Enter the

wreset command to reset the shields on both consoles.

The wreset command must be executed for the changes to the remote address to take

effect. As an alternative to the

wreset command, a power on/off reset can also be exe-

cuted.

Figure 27. Module 2 Remote Address Settings

Note:

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 58 59

Keine Kommentare

Zilog ZUSBOPTS Bedienungsanleitung Seite 37