Zilog Z16FMC2 Bedienungsanleitung PDF herunterladen (Seite 5)

Opto-Isolated USB SmartCable

User Manual

UM019506-0814 Page 5 of 8

2. Select Install from a list or specific location (Advanced), then click Next. If the

Windows Logo testing dialog appears, select

Continue Anyway.

3. Select

Search for the best driver in these locations and Include this location in

search:

, then locate and click the following directory:

<ZDS installation>\device drivers\USB\x32

4. Click Next. After the appropriate driver information has been found, click Next a sec-

ond time.

5. Click

Finish to complete the installation.

Connecting to the Target Board

Attach one end of the six-conductor ribbon cable to the SmartCable six-pin DBG connec-

tor; see Figure 2. Attach the free end of the ribbon cable to the connector on the target

board. Ensure that pin 1 on the ribbon cable (indicated by the dark stripe) is aligned with

pin 1 on the target connector. For more information on connecting the USB SmartCable to

your target board, refer to the Z8 Encore! Design for Debug Technical Note (TN0036)

A half-twist in the ribbon cable between the Zilog-manufactured target board

and the Opto-Isolated USB SmartCable is normal.

Figure 2. Connecting the Six-Conductor Ribbon

Cable to the Opto-Isolated USB SmartCable

Note:

1 2 3 4 5 6 7 8

Keine Kommentare

Zilog Z16FMC2 Bedienungsanleitung Seite 5